Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 5/8″ OD – Requires 1.5″ Stud – Qty. 25

Product Overview

When servicing or upgrading bonded marine installation and equipment mounting, Double Poly Clamp f/1/4" x 20 Studs – 5/8" OD – Requires 1.5" Stud – Qty. 25 is intended to handle servicing or upgrading bonded marine installation and equipment mounting while matching the relevant installation or operating requirements.

Double Clamp Each clamp is built to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.

Key Features

• Hose OD: 0.625"
• Stud Required: ST125-1420-24SS
• Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89"
• Recommended Clamp Spacing: 4'

Fit & Selection Guidance

Use manufacturer part number 80625 to verify the exact item. Confirm dimensions, voltage, capacity, material, mounting pattern, connection type and model compatibility where applicable. Replacement parts should be matched to the exact parent equipment or system whenever the manufacturer specifies one.

For installation-sensitive products, follow the manufacturer’s current instructions and the applicable marine electrical, plumbing, structural or safety requirements for your boat.