Product Overview
When servicing or upgrading marine plumbing, pumping, sanitation and fluid handling, Vented Loop Solenoid Valve f/37010 Series Toilet is intended to handle supporting onboard sanitation while matching the relevant installation or operating requirements.
Vented Loop Solenoid Valve for 37010 Series Toilet When installing a vented loop in the inlet hose, it is recommended that a Vented Loop Solenoid Valve (37068-2000) is connected to the vent air inlet to ensure maximum electric toilet performance and prime-ability. Connect the brass port of the valve (remove plastic filter, if installed) with the air inlet of the vented loop. Wire the solenoid valve in parallel with the toilet motor by connecting one side of the solenoid to the toilet flush switch and the other side to battery ground.
Important Notices
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.
Fit & Selection Guidance
Use manufacturer part number 37068-2000 to verify the exact item. Confirm dimensions, voltage, capacity, material, mounting pattern, connection type and model compatibility where applicable. Replacement parts should be matched to the exact parent equipment or system whenever the manufacturer specifies one.
For installation-sensitive products, follow the manufacturer’s current instructions and the applicable marine electrical, plumbing, structural or safety requirements for your boat.
Reviews
There are no reviews yet.