RUPES iBrid Nano II Polisher In Systainer Kit 120V 60Hz USA Plug

The Nano II Systainer package brings the second-generation tool together with batteries, charging equipment, functional units and a broad consumables selection. The itemized list distinguishes this package from the smaller STB configuration.

The small-tool format is intended for detailed work where the pad footprint matters. Build the process around the tool's actual movement and compatible pad size rather than simply downsizing a full-size setup.

Product details

• Manufacturer Part Number: HR81MLII/US/LUX

Included in this configuration

• BigFoot iBrid Nano II polisher (HR81MLII)
• 2x Rechargeable power pack (9HB125LT)
• Charger (9HC120LT)
• Extension shaft for Nano II polisher (94mm length) (563.392/C)
• 4x D-A COARSE Wool polishing pads with velcro 50/65mm (2” – 2.5") (9.BW70H/4)
• 4x D-A FINE Foam polishing pads with velcro 50/70mm (2” – 3”) (9.DA70M/4)
• 4x D-A COARSE Wool polishing pads with velcro 35/45mm (1” – 1.5") (9.BW40H/4)
• 6x D-A FINE Foam polishing pads with velcro 30/40mm (1” – 1.5”) (9.DA40M/6)
• D-A COARSE polishing compound 250mL (9.DACOARSE250)
• D-A FINE polishing compound 250mL (9.DAFINE250)
• Rotary Functional Unit (562.392/C)
• 3mm orbit Functional Unit (581.392/C)
• 12mm orbit Functional Unit (58.392/C)
• Rotary gear reduction (564.392/C)
• Polishing backing pad 30mm (1”1/4) (995.001/C)
• Polishing backing pad 50mm (2”) (996.001/C)
• Sanding backing pad 30mm (1”1/4) (997.001/C)
• 10x Microfinish – Adhesive denibbing discs 35mm P2000 (9.45DF2000/10)
• 10x Microfinish – Adhesive denibbing discs 35mm P3000 (9.45DF3000/10)
• Blue Microfiber Cloth (9.BF9050)
• Yellow Microfiber Cloth (9.BF9060)
• Wrench key (9.1396/C)
• RUPES Systainer T – LOC (9.CASEIII)
• Systainer inlay (9.Z110)

Before ordering or use

Confirm the package contents, power system and tool generation. Test the pad-and-compound combination on the intended finish.

Important product notices

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.